Change Plate Storage Pegs
Product Details
Keep your change plates conveniently stored and accessible to bust through your next plateau.
With 8" loadable sleeves, Change Plate Pegs bolt onto your rack uprights for easy access to your Olympic change plates.
Triple pegs for additional storage to keep your fractional plates organized and ready for your next 1lb PR. Trust us-it counts! You can throw resistance bands and other accessories on there, too, if you want; we aren't checking.
Easy installation with two bolts; hardware is included. Select the Change Plate Pegs that correspond with your power rack.
The Manticore version comes with UHMW protection for your uprights, and rubber stoppers to prevent your plates from hitting the mounting bolt heads.
PRODUCT SPECS
| General | |
|---|---|
Diameter |
|
Length |
|
| Construction | |
Lining |
|
Coating |
|
Specifics |
|
 Change Plate Storage PegsFrom $59.99 View details | |
|---|---|
| General | |
Diameter |
|
Length |
|
| Construction | |
Lining |
|
Coating |
|
Specifics |
|
- AAnonymousVerified BuyerRated 5 out of 5 stars7 months agoChange Plate Solution
The change plate storage fit perfectly on my Rogue Monster Lite rack. It was a better solution than other sellers and affordable. Highly recommended.
- JFJake F.Verified BuyerRated 5 out of 5 stars4 days agoExcellent storage option
Put 10lb on the bottom, 5lb and 2.5lb on the top and this holds perfectly. Love that it’s slightly angled so nothing moves
- DGDaniel G.Verified BuyerRated 5 out of 5 stars1 month agoWorks perfectly!
Much needed for my change plates. I have 10lb on the bottom, 5lb and 2.5lb on the top. The pegs are slightly angled up keeping the plates in.
- TNTrevor N.Verified BuyerRated 4 out of 5 stars2 months agoSpace saving and robust
This can easily fit 10lb plates on each peg, so you have a lot of flexibility on what you can store, not just tiny change plates. It comes with beefy lag bolts (along with rack bolts) if you want to mount on a wall stud and not a rack, which was much appreciated! The only reason it's not 5 stars is due to the plastic end cap on each peg/tube. These caps are the same diameter as the tubing, and in theory should fit in centred, but in reality, they are all off to a side a little bit. So, removing weights catch on the slight overhang, and I can see these caps being popped off at some point through repeated use. In contrast, my Rogue storage pegs have caps that are a little smaller than the tube diameter, so it wouldn't matter if they were off centre a bit.
Bells of Steel Canada2 months agoThank you for your feedback! We’re glad to hear that our storage solution meets your needs for flexibility and robustness. We appreciate your insight regarding the end caps, and we’ll take this into consideration for future improvements. Your support means a lot to us! -BoS Crew - DTDevin T.Verified BuyerRated 5 out of 5 stars2 months agoExcellent storage
was looking for a good way to organize my change plates on my power rack and this was exactly what I was looking for.
