Change Plate Storage Pegs
Product Details
Keep your change plates conveniently stored and accessible to bust through your next plateau.
With 8" loadable sleeves, Change Plate Pegs bolt onto your rack uprights for easy access to your Olympic change plates.
Triple pegs for additional storage to keep your fractional plates organized and ready for your next 1lb PR. Trust us-it counts! You can throw resistance bands and other accessories on there, too, if you want; we aren't checking.
Easy installation with two bolts; hardware is included. Select the Change Plate Pegs that correspond with your power rack.
The Manticore version comes with UHMW protection for your uprights, and rubber stoppers to prevent your plates from hitting the mounting bolt heads.
PRODUCT SPECS
| General | |
|---|---|
Diameter |
|
Length |
|
| Construction | |
Lining |
|
Coating |
|
Specifics |
|
- CCChad C W.Verified BuyerRated 5 out of 5 stars1 month agoLove these
I have two of these attached to both sides of the center column of my Bells' All-in-One Trainer for 5lb/2.5lb/0.5lb plate storage. I'm using two bolts going through the both of them (and the rack upright) to connect them side-by-side. Plenty of space on the horns and they are slightly angled to keep the plates from wiggling off.
Bells of Steel Canada4 weeks agoThanks for the awesome feedback! Mounting the change plate storage pegs side-by-side on your All-in-One Trainer is a slick setup. With those angled horns keeping your plates secure, you're all set for easy access and solid storage. These little additions make a big difference in organization—love seeing the creative solutions our Bells fam comes up with! 💪 Keep crushing those lifts!
-BoS Crew"
- AAnonymousVerified BuyerRated 5 out of 5 stars6 months agoChange Plate Solution
The change plate storage fit perfectly on my Rogue Monster Lite rack. It was a better solution than other sellers and affordable. Highly recommended.
- DGDaniel G.Verified BuyerRated 5 out of 5 stars5 days agoWorks perfectly!
Much needed for my change plates. I have 10lb on the bottom, 5lb and 2.5lb on the top. The pegs are slightly angled up keeping the plates in.
- TNTrevor N.Verified BuyerRated 4 out of 5 stars1 month agoSpace saving and robust
This can easily fit 10lb plates on each peg, so you have a lot of flexibility on what you can store, not just tiny change plates. It comes with beefy lag bolts (along with rack bolts) if you want to mount on a wall stud and not a rack, which was much appreciated! The only reason it's not 5 stars is due to the plastic end cap on each peg/tube. These caps are the same diameter as the tubing, and in theory should fit in centred, but in reality, they are all off to a side a little bit. So, removing weights catch on the slight overhang, and I can see these caps being popped off at some point through repeated use. In contrast, my Rogue storage pegs have caps that are a little smaller than the tube diameter, so it wouldn't matter if they were off centre a bit.
Bells of Steel Canada1 month agoThank you for your feedback! We’re glad to hear that our storage solution meets your needs for flexibility and robustness. We appreciate your insight regarding the end caps, and we’ll take this into consideration for future improvements. Your support means a lot to us! -BoS Crew - DTDevin T.Verified BuyerRated 5 out of 5 stars1 month agoExcellent storage
was looking for a good way to organize my change plates on my power rack and this was exactly what I was looking for.
