Hydra Flat Foot Power Rack Builder (3" x 3", ⅝" Holes)
Build Your Rack
Customize your Rack
- 108"
- 90"
- 84"
- 72"
- 43" Depth
- 30" Depth
- 24" Depth
- 43" Width
- 41" Width
Pull-Up Bar
-
Fat/Skinny Pull Up Bar
Fat/Skinny Pull Up Bar
2-in-1 is more fun with this power rack staple.
Target your back, biceps, and core, or just hang around to boost your grip strength and decompress your spine after heavy squats.Or throw on a Cable Pulley to simulate cable machine exercises at home.
This double pull up bar has a standard diameter bar and a fat grip bar with rust-resistant black powder coat. With a 500lb weight capacity and sturdy steel construction, this bad boy was built to last.
Choose the size that corresponds with your power rack width and hole size. Hardware included.
$74.99+ ADD -
Multigrip Pull Up Bar
Multi-Grip Pull Up Bar
Raise the bar on your strength training with this upgraded pull-up bar.
Choose from the built-in standard bar, fat grip bar, or neutral grip to keep things spicy. Target your back, biceps, and core, or just hang around to boost your grip strength and decompress your spine after heavy squats. Or throw on a Cable Pulley to simulate cable machine exercises at home.
The Multi-Grip Pull Up Bar has an ergonomic design and rust-resistant black powder coat. With a 500lb weight capacity and sturdy steel construction, this bad boy was built to last.
Choose the size that corresponds with your power rack width and hole size. Hardware included.
$99.99+ ADD -
Adjustable Straight Pull Up Bar
Adjustable Pull-up Bar Rack Attachment
The world is your oyster with this handy-dandy rack attachment. Use it as a second pull-up bar on your power rack or add it to a pair of lever arms to unlock barbell and machine-inspired exercises at home — hip thrusts, thrusters, rows, deadlifts, you name it! The beefy 6-gauge steel promises solid construction while the different finishes & knurling offer plenty of variety. With a max capacity of 500lbs, these adjustable pull-up bars are meant to withstand heavy weights. Choose the option that suits your power rack or cable tower. Hardware included.
2.3"x2.3" bare steel: Fits our 2.3" racks & Cable Towers, 1.25" diameter, bare steel finish & includes hitch pins
2.3"x2.3" knurled stainless: Fits our 2.3" racks & Cable Towers, 1" diameter, stainless steel finish, moderate knurling & includes hitch pins
Hydra powder coated: Fits our Hydra racks, 1.25" diameter, light textured black powder coat finish & includes hitch pins
Manticore powder coated: Fits our Manticore racks, 1.25" diameter, light textured black powder coat finish, includes quick-locking mag pins & UHMW lining inside to protect your rack
IMPORTANT: Both 2.3" pull-up bars are NOT compatible with our Strongman Yoke, as its uprights are slightly too wide to accommodate them.
$59.99+ ADD -
43" Straight Pull Up Bar
Straight Pull Up Bar
Raise the bar on your strength training with this power rack staple.
Target your back, biceps, and core, or just hang around to boost your grip strength and decompress your spine after heavy squats. Or throw on a Cable Pulley to simulate cable machine exercises at home.
This straight pull up bar has a standard 32mm diameter and rust-resistant black powder coat. With a 500lb weight capacity and sturdy steel construction, this bad boy was built to last.
Choose the size that corresponds with your power rack width and hole size. Hardware included.
$54.99+ ADD -
Globe Pull Up Bar + 43" Crossmember
Globe Pull Up Bar
Raise the bar on your strength training with the last pull-up bar you'll ever need.
Choose from a standard grip, neutral grip, or globe grip to keep things spicy.
Target your back, biceps, forearms, and core, or just hang around to boost your grip strength and decompress your spine after heavy squats.
The Globe Grip Pull Up Bar has an innovative design and rust-resistant black powder coat. With a 500lb weight capacity and sturdy steel construction, this bad boy was built to last.
Choose the size that corresponds with your power rack.
Requires a 43" crossmember or can be mounted on the side of your rack if it has a 43" depth. Hardware included.
$189.99+ ADD -
41" Straight Pull Up Bar
Straight Pull Up Bar
Raise the bar on your strength training with this power rack staple.
Target your back, biceps, and core, or just hang around to boost your grip strength and decompress your spine after heavy squats. Or throw on a Cable Pulley to simulate cable machine exercises at home.
This straight pull up bar has a standard 32mm diameter and rust-resistant black powder coat. With a 500lb weight capacity and sturdy steel construction, this bad boy was built to last.
Choose the size that corresponds with your power rack width and hole size. Hardware included.
$49.99+ ADD
Back Cross Piece
-
Hydra Logo Plate Crossmember
Logo Plate Crossmembers
Ritz up your rack with a deluxe Logo Plate Crossmember!
The Hydra version provides an aesthetic all-black design and B.o.S logo to elevate the look and feel of your Hydra rack. Fits the Hydra power rack line-up and select non-B.o.S. racks with true 3" x 3" uprights & 5/8" holes that have an inner width of 43 inches.
The Manticore version features a brushed-metal logo plate, crafted to elevate the look and feel of your Manticore Rack. Fits the Manticore power rack line-up and select non-B.o.S. racks with true 3" x 3" uprights & 1-inch holes that have an inner width of 43 inches.
Hardware included.
IMPORTANT: The Manticore version requires a separate 43-inch crossmember to mount the logo plate, which is not included by default.
$139.99+ ADD -
43" Straight Pull Up
Straight Pull Up Bar
Raise the bar on your strength training with this power rack staple.
Target your back, biceps, and core, or just hang around to boost your grip strength and decompress your spine after heavy squats. Or throw on a Cable Pulley to simulate cable machine exercises at home.
This straight pull up bar has a standard 32mm diameter and rust-resistant black powder coat. With a 500lb weight capacity and sturdy steel construction, this bad boy was built to last.
Choose the size that corresponds with your power rack width and hole size. Hardware included.
$54.99+ ADD -
43" Crossmember
Hydra Crossmembers
Looking to upgrade your Hydra Rack? Or build your own franken-rack? Maybe even upgrade your non-Bells of Steel Rack that's also true 3 x 3 inch with 5/8 inch holes?
Crossmembers are the horizontal bars that connect the uprights of your power rack. They're easy to install and adjust, and come in different lengths and styles to suit your needs and preferences.They add stability and strength to your rack, while opening it up to more possibilities for your training.
Mount band pegs, utility horns, and other rack attachments.
Unless otherwise indicated, crossmembers are sold in pairs (2 pieces).
Crossmembers come with hardware to connect both sides, 110 mm bolts AND 120 mm longer bolts for 6 post configurations.
NOTE: Requires two 24mm wrenches to install (not included by default). Correctly sized box-end, adjustable & socket wrenches are suitable alternatives.
$89.99+ ADD -
Fat/Skinny Pull Up Bar
Fat/Skinny Pull Up Bar
2-in-1 is more fun with this power rack staple.
Target your back, biceps, and core, or just hang around to boost your grip strength and decompress your spine after heavy squats.Or throw on a Cable Pulley to simulate cable machine exercises at home.
This double pull up bar has a standard diameter bar and a fat grip bar with rust-resistant black powder coat. With a 500lb weight capacity and sturdy steel construction, this bad boy was built to last.
Choose the size that corresponds with your power rack width and hole size. Hardware included.
$74.99+ ADD -
Multigrip Pull Up Bar
Multi-Grip Pull Up Bar
Raise the bar on your strength training with this upgraded pull-up bar.
Choose from the built-in standard bar, fat grip bar, or neutral grip to keep things spicy. Target your back, biceps, and core, or just hang around to boost your grip strength and decompress your spine after heavy squats. Or throw on a Cable Pulley to simulate cable machine exercises at home.
The Multi-Grip Pull Up Bar has an ergonomic design and rust-resistant black powder coat. With a 500lb weight capacity and sturdy steel construction, this bad boy was built to last.
Choose the size that corresponds with your power rack width and hole size. Hardware included.
$99.99+ ADD -
Globe Pull Up Bar + 43" Crossmember
Globe Pull Up Bar
Raise the bar on your strength training with the last pull-up bar you'll ever need.
Choose from a standard grip, neutral grip, or globe grip to keep things spicy.
Target your back, biceps, forearms, and core, or just hang around to boost your grip strength and decompress your spine after heavy squats.
The Globe Grip Pull Up Bar has an innovative design and rust-resistant black powder coat. With a 500lb weight capacity and sturdy steel construction, this bad boy was built to last.
Choose the size that corresponds with your power rack.
Requires a 43" crossmember or can be mounted on the side of your rack if it has a 43" depth. Hardware included.
$189.99+ ADD -
41" Crossmember
Hydra Crossmembers
Looking to upgrade your Hydra Rack? Or build your own franken-rack? Maybe even upgrade your non-Bells of Steel Rack that's also true 3 x 3 inch with 5/8 inch holes?
Crossmembers are the horizontal bars that connect the uprights of your power rack. They're easy to install and adjust, and come in different lengths and styles to suit your needs and preferences.They add stability and strength to your rack, while opening it up to more possibilities for your training.
Mount band pegs, utility horns, and other rack attachments.
Unless otherwise indicated, crossmembers are sold in pairs (2 pieces).
Crossmembers come with hardware to connect both sides, 110 mm bolts AND 120 mm longer bolts for 6 post configurations.
NOTE: Requires two 24mm wrenches to install (not included by default). Correctly sized box-end, adjustable & socket wrenches are suitable alternatives.
$84.99+ ADD -
41" Straight Pull Up Bar
Straight Pull Up Bar
Raise the bar on your strength training with this power rack staple.
Target your back, biceps, and core, or just hang around to boost your grip strength and decompress your spine after heavy squats. Or throw on a Cable Pulley to simulate cable machine exercises at home.
This straight pull up bar has a standard 32mm diameter and rust-resistant black powder coat. With a 500lb weight capacity and sturdy steel construction, this bad boy was built to last.
Choose the size that corresponds with your power rack width and hole size. Hardware included.
$49.99+ ADD
Rack Safeties
-
Spotter Arms
Spotter Arms Rack Attachment
You may be more than a pretty face, but dropping a loaded barbell while benching certainly won’t improve things.Stay safe while benching or squatting with the heavy-duty Spotter Arms Attachment! Or use them as a secondary squat/bench station for barbell supersets! UHMW lining protects your barbell from damage, while the Manticore version boasts extra UHMW to keep your rack uprights in tip-top shape.60mm version: compatible with our 60mm racks and non-B.o.S. 2.3" x 2.3" racks with 5/8" holes.Hydra version: compatible with our Hydra racks and non-B.o.S. racks with true 3" x 3" uprights with 5/8" holes.
Manticore version: compatible with our Manticore racks and non-B.o.S. racks with true 3" x 3" uprights with 1" holes.
Download Spotter Arms Rack Attachment - 2.3" x 2.3" (5/8" Holes) Pair Product Manual$189.99+ ADD -
43" Pin Pipe Safeties
Pin Pipe Safeties
Don't compromise on safety when it comes to your training. These Pin Pipe Safeties offer unparalleled protection and peace of mind at a reasonable cost.
Select the safeties that correspond with the depth and hole sizing of your power rack.
$99.99+ ADD -
30" Pin Pipe Safeties
Pin Pipe Safeties
Don't compromise on safety when it comes to your training. These Pin Pipe Safeties offer unparalleled protection and peace of mind at a reasonable cost.
Select the safeties that correspond with the depth and hole sizing of your power rack.
$69.99+ ADD -
24" Pin Pipe Safeties
Pin Pipe Safeties
Don't compromise on safety when it comes to your training. These Pin Pipe Safeties offer unparalleled protection and peace of mind at a reasonable cost.
Select the safeties that correspond with the depth and hole sizing of your power rack.
$29.99+ ADD -
43" Flip-down Safeties
Flip-Down Safeties
Don't compromise on safety when it comes to your training.
These Flip Down Safeties offer the confidence and reliability of a spotter without the weird-feeling personal space invasion.
Select the safeties that correspond with the depth and hole sizing of your power rack.
$239.99+ ADD -
30" Flip-down Safeties
Flip-Down Safeties
Don't compromise on safety when it comes to your training.
These Flip Down Safeties offer the confidence and reliability of a spotter without the weird-feeling personal space invasion.
Select the safeties that correspond with the depth and hole sizing of your power rack.
$209.99+ ADD -
43" Strap SafetiesBlack
Safety Straps for Hydra & Manticore Racks
Don't compromise on safety when it comes to your training. Safety Straps offer unparalleled protection and peace of mind, gently catching a loaded barbell without sacrificing security.
Select the safeties that correspond with the depth and hole sizing of your power rack.
$49.99+ ADD -
30" Strap SafetiesBlack
Safety Straps for Hydra & Manticore Racks
Don't compromise on safety when it comes to your training. Safety Straps offer unparalleled protection and peace of mind, gently catching a loaded barbell without sacrificing security.
Select the safeties that correspond with the depth and hole sizing of your power rack.
$42.99+ ADD -
24" Strap SafetiesBlack
Safety Straps for Hydra & Manticore Racks
Don't compromise on safety when it comes to your training. Safety Straps offer unparalleled protection and peace of mind, gently catching a loaded barbell without sacrificing security.
Select the safeties that correspond with the depth and hole sizing of your power rack.
$37.99+ ADD
J-Cups
-
Hydra J-Cups
Standard J-Cups
These tried-and-true J-Cups have UHMW protection on all sides to keep your bar evenly distributed and secure while withstanding enthusiastic re-rackings. They're more basic than pumpkin spice season, but they do the trick.
60mm version: Fits our 60mm racks + cable towers & non-B.o.S. 60mm x 60mm racks with 5/8" holes. UHMW triple-padding protects your bar & features a 700lb combined capacity.
Hydra version: Fits our Hydra racks & non-B.o.S. true 3" x 3" racks with 5/8" holes. UHMW triple-padding protects your bar & features a 1,000lb combined capacity.
Manticore version: Fits our Manticore racks & non-B.o.S. true 3" x 3" racks with 1" holes. UHMW triple-padding protects your bar & features a 1,000lb combined capacity. Includes quick-locking mag pins and additional UHMW inside to protect your rack.
IMPORTANT: Choose the correct J-Cup version for the uprights and hole size on your power rack. Sold in pairs.
$74.99+ ADD -
Roller J-Cups
Roller J-Cups
Our innovative Roller J-Cups make solo benching a dream. Hefty build with durable nylon rollers to protect your barbell while making adjustments smoother than Usher on roller skates. For all the bench press lovers out there, this is a must.
60mm version: Fits our 60mm racks + cable towers & non-B.o.S. 60mm x 60mm racks with 5/8" holes. Includes durable nylon rollers & features a 600lb combined capacity.
Hydra version: Fits our Hydra racks & non-B.o.S. true 3" x 3" racks with 5/8" holes. The durable nylon rollers & UHMW double-padding protect your bar. Features an 1,000lb combined capacity.
Manticore version: Fits our Manticore racks & non-B.o.S. true 3" x 3" racks with 1" holes. The durable nylon rollers & UHMW double-padding protect your bar. Features a 1,000lb combined capacity. Includes quick-locking mag pins and additional UHMW inside to protect your rack.
$119.99+ ADD -
Sawndwich J-Cups
Sandwich J-Cups
The robust Sandwich J-cups are heavy-duty and a serious plus when using a safety squat bar. The beefy sandwich design, abrasion-resistant lining, and sloped backing protect your bar and you while re-racking.
60mm version: Fits our 60mm racks + cable towers & non-B.o.S. 60mm x 60mm racks with 5/8" holes. Thick HDPE padding protects your bar & features an 880lb combined capacity.
Hydra version: Fits our Hydra racks & non-B.o.S. true 3" x 3" racks with 5/8" holes. Thick HDPE padding protects your bar & features a 1,000lb combined capacity.
Manticore version: Fits our Manticore racks & non-B.o.S. true 3" x 3" racks with 1" holes. Thick HDPE padding protects your bar & features a 1,000lb combined capacity. Includes quick-locking mag pins and additional HDPE inside to protect your rack.
$119.99+ ADD -
Monolift Rack Attachment
Monolift Rack Attachment
The adjustable Monolift Attachment offers a space-saving and inexpensive monolift solution.
UHMW plastic lined to preserve your barbell during enthusiastic re-rackings, with nylon rollers on the Hydra version for easier bar adjustments.
Easy to set up and adjust-just place the pin and drop it in. Perfect for solo handoffs, so you can save every bit of energy to hit that next PR.
IMPORTANT: Our Monolift Arms ONLY fit upright tubing dimensions of 2.3" x 2.3" (60mm x 60mm) with 5/8" holes. Check out the Hydra Monolift for TRUE 3" x 3" uprights with 5/8" holes.
Download Monolift Rack Attachment - 2.3" x 2.3" (5/8" Holes) - Pair Product Manual$299.99+ ADD
Flat Foot Length
-
62" Flat Foot Attachment
Hydra Flat Foot Support System
Compatible with non-flat-foot Hydra power racks, our flat foot support system includes flat feet, reinforcement plates, and hardware to hold everything together.
The flat feet come in 56" and 62" lengths, with an optional 43" flat foot crossmember to connect them for added stability.
The 56" length can be paired with the 30" or 24" cross member depth, while the 62" length can be paired with the 43", 30" or 24" depth. Popular combos are 43" with a 62" flat foot for maximum roominess. 30" with the 56" flat foot for maximum stability and minimal space. Or get a little weird with the 24" depth and 56" flat foot.
You can select the flat foot with a bottom cross member that connects the 2 feet for increased stability, or leave it out. However, the bottom cross member is NOT compatible with the lat pulldown attachment - you'll need a rear base stabilizer instead.
IMPORTANT: The flat foot support system adds 2-1/4" to the overall height of your rack. Compatible with non-Flat Foot Hydra power racks only.
$114.99+ ADD -
62" Flat Foot Attachment + Bottom Reinforcement Crossmember
Hydra Flat Foot Support System
Compatible with non-flat-foot Hydra power racks, our flat foot support system includes flat feet, reinforcement plates, and hardware to hold everything together.
The flat feet come in 56" and 62" lengths, with an optional 43" flat foot crossmember to connect them for added stability.
The 56" length can be paired with the 30" or 24" cross member depth, while the 62" length can be paired with the 43", 30" or 24" depth. Popular combos are 43" with a 62" flat foot for maximum roominess. 30" with the 56" flat foot for maximum stability and minimal space. Or get a little weird with the 24" depth and 56" flat foot.
You can select the flat foot with a bottom cross member that connects the 2 feet for increased stability, or leave it out. However, the bottom cross member is NOT compatible with the lat pulldown attachment - you'll need a rear base stabilizer instead.
IMPORTANT: The flat foot support system adds 2-1/4" to the overall height of your rack. Compatible with non-Flat Foot Hydra power racks only.
$114.99+ ADD -
56" Flat Foot Attachment
Hydra Flat Foot Support System
Compatible with non-flat-foot Hydra power racks, our flat foot support system includes flat feet, reinforcement plates, and hardware to hold everything together.
The flat feet come in 56" and 62" lengths, with an optional 43" flat foot crossmember to connect them for added stability.
The 56" length can be paired with the 30" or 24" cross member depth, while the 62" length can be paired with the 43", 30" or 24" depth. Popular combos are 43" with a 62" flat foot for maximum roominess. 30" with the 56" flat foot for maximum stability and minimal space. Or get a little weird with the 24" depth and 56" flat foot.
You can select the flat foot with a bottom cross member that connects the 2 feet for increased stability, or leave it out. However, the bottom cross member is NOT compatible with the lat pulldown attachment - you'll need a rear base stabilizer instead.
IMPORTANT: The flat foot support system adds 2-1/4" to the overall height of your rack. Compatible with non-Flat Foot Hydra power racks only.
$109.99+ ADD -
56" Flat Foot Attachment + Bottom Reinforcement Crossmember
Hydra Flat Foot Support System
Compatible with non-flat-foot Hydra power racks, our flat foot support system includes flat feet, reinforcement plates, and hardware to hold everything together.
The flat feet come in 56" and 62" lengths, with an optional 43" flat foot crossmember to connect them for added stability.
The 56" length can be paired with the 30" or 24" cross member depth, while the 62" length can be paired with the 43", 30" or 24" depth. Popular combos are 43" with a 62" flat foot for maximum roominess. 30" with the 56" flat foot for maximum stability and minimal space. Or get a little weird with the 24" depth and 56" flat foot.
You can select the flat foot with a bottom cross member that connects the 2 feet for increased stability, or leave it out. However, the bottom cross member is NOT compatible with the lat pulldown attachment - you'll need a rear base stabilizer instead.
IMPORTANT: The flat foot support system adds 2-1/4" to the overall height of your rack. Compatible with non-Flat Foot Hydra power racks only.
$109.99+ ADD
Additional Options and Accessories
-
Single 24mm Wrench
Hydra Hardware
Simplify the Hydra Power Rack assembly process with this ultra-convenient hardware kit.
The 24mm wrench fits all bolts used in the Hydra line-up, concrete anchor bolts (set of 8) and the rack attachment pins keep your rig secure, and the B.o.S logo plate promises a PR in pizzazz.
Hardware fits true 3″ x 3″ tubing with 5/8″ holes
Download Hydra BOS Logo Tag with Assembly Instructions Product Manual$5.99+ ADD -
Rack Attachment Pin
Hydra Hardware
Simplify the Hydra Power Rack assembly process with this ultra-convenient hardware kit.
The 24mm wrench fits all bolts used in the Hydra line-up, concrete anchor bolts (set of 8) and the rack attachment pins keep your rig secure, and the B.o.S logo plate promises a PR in pizzazz.
Hardware fits true 3″ x 3″ tubing with 5/8″ holes
Download Hydra BOS Logo Tag with Assembly Instructions Product Manual$10.99+ ADD -
Concrete Anchors - Set of 8
Hydra Hardware
Simplify the Hydra Power Rack assembly process with this ultra-convenient hardware kit.
The 24mm wrench fits all bolts used in the Hydra line-up, concrete anchor bolts (set of 8) and the rack attachment pins keep your rig secure, and the B.o.S logo plate promises a PR in pizzazz.
Hardware fits true 3″ x 3″ tubing with 5/8″ holes
Download Hydra BOS Logo Tag with Assembly Instructions Product Manual$11.99+ ADD -
Extra Logo Plate
Hydra Hardware
Simplify the Hydra Power Rack assembly process with this ultra-convenient hardware kit.
The 24mm wrench fits all bolts used in the Hydra line-up, concrete anchor bolts (set of 8) and the rack attachment pins keep your rig secure, and the B.o.S logo plate promises a PR in pizzazz.
Hardware fits true 3″ x 3″ tubing with 5/8″ holes
Download Hydra BOS Logo Tag with Assembly Instructions Product Manual$14.99+ ADD
Rack Attachments
-
Backordered - Ships 2025/01/31
72" Lat Pulldown - Plate Loaded
Lat Pulldown & Low Row Rack Attachment - Hydra & Manticore
Build your back with the versatile and space-efficient Lat Pulldown Low Row Attachment.
With this rack attachment, you can do lat pulldowns, cable rows, and other cable exercises using the same machine and seamlessly switch between them while adding only 24-30" of depth and 4.5" of height to your existing rack.
The loadable steel tubing weight horns are angled to keep your Olympic Weight Plates in place, but axle collar clips will fit just right for extra security. The hefty 500lb cable capacity, 1:1 pull ratio, and 15+ attachments (lat bar and curl bar are included) offer endless training.
The non-slip footplate and included leg pad will keep you locked and loaded while repping it out, while the velvety smoothness of the aluminum pulleys gives peanut butter a run for its money.
Includes padded leg crossbar.
IMPORTANT: To fit correctly, it must match the height of your rack uprights (72", 84", or 90") if you have a flat foot rack, choose the height of the uprights attached to your flat foot. To mount this attachment, one 43" rear cross-member with holes on the top is required.
$629.99+ ADD -
Backordered - Ships 2025/01/31
84" Lat Pulldown - Plate Loaded
Lat Pulldown & Low Row Rack Attachment - Hydra & Manticore
Build your back with the versatile and space-efficient Lat Pulldown Low Row Attachment.
With this rack attachment, you can do lat pulldowns, cable rows, and other cable exercises using the same machine and seamlessly switch between them while adding only 24-30" of depth and 4.5" of height to your existing rack.
The loadable steel tubing weight horns are angled to keep your Olympic Weight Plates in place, but axle collar clips will fit just right for extra security. The hefty 500lb cable capacity, 1:1 pull ratio, and 15+ attachments (lat bar and curl bar are included) offer endless training.
The non-slip footplate and included leg pad will keep you locked and loaded while repping it out, while the velvety smoothness of the aluminum pulleys gives peanut butter a run for its money.
Includes padded leg crossbar.
IMPORTANT: To fit correctly, it must match the height of your rack uprights (72", 84", or 90") if you have a flat foot rack, choose the height of the uprights attached to your flat foot. To mount this attachment, one 43" rear cross-member with holes on the top is required.
$629.99+ ADD -
Backordered - Ships 2025/01/31
90" Lat Pulldown - Plate Loaded
Lat Pulldown & Low Row Rack Attachment - Hydra & Manticore
Build your back with the versatile and space-efficient Lat Pulldown Low Row Attachment.
With this rack attachment, you can do lat pulldowns, cable rows, and other cable exercises using the same machine and seamlessly switch between them while adding only 24-30" of depth and 4.5" of height to your existing rack.
The loadable steel tubing weight horns are angled to keep your Olympic Weight Plates in place, but axle collar clips will fit just right for extra security. The hefty 500lb cable capacity, 1:1 pull ratio, and 15+ attachments (lat bar and curl bar are included) offer endless training.
The non-slip footplate and included leg pad will keep you locked and loaded while repping it out, while the velvety smoothness of the aluminum pulleys gives peanut butter a run for its money.
Includes padded leg crossbar.
IMPORTANT: To fit correctly, it must match the height of your rack uprights (72", 84", or 90") if you have a flat foot rack, choose the height of the uprights attached to your flat foot. To mount this attachment, one 43" rear cross-member with holes on the top is required.
$629.99+ ADD -
Backordered - Ships 2025/01/31
84" Lat Pulldown - 210 LB Weight Stack
Lat Pulldown & Low Row Rack Attachment - Hydra & Manticore
Build your back with the versatile and space-efficient Lat Pulldown Low Row Attachment.
With this rack attachment, you can do lat pulldowns, cable rows, and other cable exercises using the same machine and seamlessly switch between them while adding only 24-30" of depth and 4.5" of height to your existing rack.
The loadable steel tubing weight horns are angled to keep your Olympic Weight Plates in place, but axle collar clips will fit just right for extra security. The hefty 500lb cable capacity, 1:1 pull ratio, and 15+ attachments (lat bar and curl bar are included) offer endless training.
The non-slip footplate and included leg pad will keep you locked and loaded while repping it out, while the velvety smoothness of the aluminum pulleys gives peanut butter a run for its money.
Includes padded leg crossbar.
IMPORTANT: To fit correctly, it must match the height of your rack uprights (72", 84", or 90") if you have a flat foot rack, choose the height of the uprights attached to your flat foot. To mount this attachment, one 43" rear cross-member with holes on the top is required.
$1,479.99X OUT OF STOCK -
Backordered - Ships 2025/01/31
90" Lat Pulldown - 210 LB Weight Stack
Lat Pulldown & Low Row Rack Attachment - Hydra & Manticore
Build your back with the versatile and space-efficient Lat Pulldown Low Row Attachment.
With this rack attachment, you can do lat pulldowns, cable rows, and other cable exercises using the same machine and seamlessly switch between them while adding only 24-30" of depth and 4.5" of height to your existing rack.
The loadable steel tubing weight horns are angled to keep your Olympic Weight Plates in place, but axle collar clips will fit just right for extra security. The hefty 500lb cable capacity, 1:1 pull ratio, and 15+ attachments (lat bar and curl bar are included) offer endless training.
The non-slip footplate and included leg pad will keep you locked and loaded while repping it out, while the velvety smoothness of the aluminum pulleys gives peanut butter a run for its money.
Includes padded leg crossbar.
IMPORTANT: To fit correctly, it must match the height of your rack uprights (72", 84", or 90") if you have a flat foot rack, choose the height of the uprights attached to your flat foot. To mount this attachment, one 43" rear cross-member with holes on the top is required.
$1,479.99X OUT OF STOCK
-
Backordered - Ships 2025/04/15
Kraken Plate Loaded - Single Side
Kraken Rack Attachment for 4 Post Hydra & Manticore Racks (Single Side)
The Kraken is a compact rack-mounted cable system, turning your 3” x 3” 4-post power rack with ⅝” or 1” holes into a dual-handle cable tower with 5lbs to 210+lbs of resistance! All of this while maintaining the use of your barbell and rack attachments.
It comes in two versions:
- Plate-Loaded: use your weight plates to save big bucks
- Weight Stack: a convenient 210-pound stack for quick, no-fuss adjustmentsThanks to the knurled handle, nylon rollers and chrome-coated pop pins, the trolleys are adjustable with a single hand. By using your uprights’ holes for height selections, you can fine-tune the feel of nearly all your cable exercises.
The Kraken saves the clangin’ & bangin’ for your barbell lifts; its aluminum pulleys and dual guide rods deliver the kind of velvety smoothness you'd expect at a commercial gym — but without the crowds, the dude grunting in the corner, and that fit-fluencer hogging the Smith Machine for “just one more angle.”
The dual aluminum handles have 6002 bearings, rotating as smoothly as a barbell, and allow bilateral exercises from a single upright. A single cable features a 2:1 pull ratio (10lbs feels like 5lbs), tackling everything from rehab work to isolations. Plus, the cable travel offers uninterrupted focus during sport-specific drills or while getting that joooooicy bicep pump.
When connected with the cable adapter, the Kraken converts into a glorious 1:1 pull ratio — perfect for heavy lat pulldowns & low rows — with no need to buy a separate weight pack expansion down the road.
Safety is no afterthought either — the Weight Stack version features an optional Shroud that does double duty: protecting fingers (big and small) AND acting as a pegboard, keeping your cable attachments neatly stowed using their included hooks. This means more family time while keeping your little ones safe… because a home gym shouldn't need a “Caution: Dangerous Sh*t EVERYWHERE” sign.
A Single Side of the Kraken Includes:
- Two aluminum handles
- One cable adapter
- Aluminum pulley wheels
- Cables
- Trolley
- Guide rods
- Weight carriage or weight stacks
- Mounting brackets
- Mounting hardwareKraken Compatibility Chart
This Kraken configuration is compatible with the racks listed below:
Power Rack
Height Required
Crossmember Depth Required
84", 90", or 108" (Requires raising the height of your crossmembers)
24", 30" or 43"
92.25", or 110.25" (Requires one extra pair of crossmembers above the Flat Feet & the 110.25" requires raising the height of your crossmembers)
24", 30" or 43"
84", 90", or 108" (Requires raising the height of your crossmembers)
24", 30" or 43"
93.25", or 111.25" (Requires one extra pair of crossmembers above the Flat Feet & the 11.25" requires raising the height of your crossmembers)
24", 30" or 43"
Non-BoS Rack Compatibility: You don’t need one of our power racks to unleash The Kraken! This rack attachment’s mounting brackets make it an awesome addition to most 3” x 3” power racks. Plus, we’ve got affordable rack components to bridge any gaps. See? No Bells of Steel blood oath required.
IMPORTANT: Rack must be bolted down or have Front Foot Stabilizers. Minimize single-sided cable use as it accelerates wear on the cable & pulleys and may cause cable twisting.
$719.99X OUT OF STOCK -
Backordered - Ships 2025/04/15
Kraken Weight Stack - Single Side
Kraken Rack Attachment for 4 Post Hydra & Manticore Racks (Single Side)
The Kraken is a compact rack-mounted cable system, turning your 3” x 3” 4-post power rack with ⅝” or 1” holes into a dual-handle cable tower with 5lbs to 210+lbs of resistance! All of this while maintaining the use of your barbell and rack attachments.
It comes in two versions:
- Plate-Loaded: use your weight plates to save big bucks
- Weight Stack: a convenient 210-pound stack for quick, no-fuss adjustmentsThanks to the knurled handle, nylon rollers and chrome-coated pop pins, the trolleys are adjustable with a single hand. By using your uprights’ holes for height selections, you can fine-tune the feel of nearly all your cable exercises.
The Kraken saves the clangin’ & bangin’ for your barbell lifts; its aluminum pulleys and dual guide rods deliver the kind of velvety smoothness you'd expect at a commercial gym — but without the crowds, the dude grunting in the corner, and that fit-fluencer hogging the Smith Machine for “just one more angle.”
The dual aluminum handles have 6002 bearings, rotating as smoothly as a barbell, and allow bilateral exercises from a single upright. A single cable features a 2:1 pull ratio (10lbs feels like 5lbs), tackling everything from rehab work to isolations. Plus, the cable travel offers uninterrupted focus during sport-specific drills or while getting that joooooicy bicep pump.
When connected with the cable adapter, the Kraken converts into a glorious 1:1 pull ratio — perfect for heavy lat pulldowns & low rows — with no need to buy a separate weight pack expansion down the road.
Safety is no afterthought either — the Weight Stack version features an optional Shroud that does double duty: protecting fingers (big and small) AND acting as a pegboard, keeping your cable attachments neatly stowed using their included hooks. This means more family time while keeping your little ones safe… because a home gym shouldn't need a “Caution: Dangerous Sh*t EVERYWHERE” sign.
A Single Side of the Kraken Includes:
- Two aluminum handles
- One cable adapter
- Aluminum pulley wheels
- Cables
- Trolley
- Guide rods
- Weight carriage or weight stacks
- Mounting brackets
- Mounting hardwareKraken Compatibility Chart
This Kraken configuration is compatible with the racks listed below:
Power Rack
Height Required
Crossmember Depth Required
84", 90", or 108" (Requires raising the height of your crossmembers)
24", 30" or 43"
92.25", or 110.25" (Requires one extra pair of crossmembers above the Flat Feet & the 110.25" requires raising the height of your crossmembers)
24", 30" or 43"
84", 90", or 108" (Requires raising the height of your crossmembers)
24", 30" or 43"
93.25", or 111.25" (Requires one extra pair of crossmembers above the Flat Feet & the 11.25" requires raising the height of your crossmembers)
24", 30" or 43"
Non-BoS Rack Compatibility: You don’t need one of our power racks to unleash The Kraken! This rack attachment’s mounting brackets make it an awesome addition to most 3” x 3” power racks. Plus, we’ve got affordable rack components to bridge any gaps. See? No Bells of Steel blood oath required.
IMPORTANT: Rack must be bolted down or have Front Foot Stabilizers. Minimize single-sided cable use as it accelerates wear on the cable & pulleys and may cause cable twisting.
$1,449.99X OUT OF STOCK -
Backordered - Ships 2025/04/15
Kraken Plate Loaded - Single Side
Kraken Rack Attachment for 4 Post Hydra & Manticore Racks (Single Side)
The Kraken is a compact rack-mounted cable system, turning your 3” x 3” 4-post power rack with ⅝” or 1” holes into a dual-handle cable tower with 5lbs to 210+lbs of resistance! All of this while maintaining the use of your barbell and rack attachments.
It comes in two versions:
- Plate-Loaded: use your weight plates to save big bucks
- Weight Stack: a convenient 210-pound stack for quick, no-fuss adjustmentsThanks to the knurled handle, nylon rollers and chrome-coated pop pins, the trolleys are adjustable with a single hand. By using your uprights’ holes for height selections, you can fine-tune the feel of nearly all your cable exercises.
The Kraken saves the clangin’ & bangin’ for your barbell lifts; its aluminum pulleys and dual guide rods deliver the kind of velvety smoothness you'd expect at a commercial gym — but without the crowds, the dude grunting in the corner, and that fit-fluencer hogging the Smith Machine for “just one more angle.”
The dual aluminum handles have 6002 bearings, rotating as smoothly as a barbell, and allow bilateral exercises from a single upright. A single cable features a 2:1 pull ratio (10lbs feels like 5lbs), tackling everything from rehab work to isolations. Plus, the cable travel offers uninterrupted focus during sport-specific drills or while getting that joooooicy bicep pump.
When connected with the cable adapter, the Kraken converts into a glorious 1:1 pull ratio — perfect for heavy lat pulldowns & low rows — with no need to buy a separate weight pack expansion down the road.
Safety is no afterthought either — the Weight Stack version features an optional Shroud that does double duty: protecting fingers (big and small) AND acting as a pegboard, keeping your cable attachments neatly stowed using their included hooks. This means more family time while keeping your little ones safe… because a home gym shouldn't need a “Caution: Dangerous Sh*t EVERYWHERE” sign.
A Single Side of the Kraken Includes:
- Two aluminum handles
- One cable adapter
- Aluminum pulley wheels
- Cables
- Trolley
- Guide rods
- Weight carriage or weight stacks
- Mounting brackets
- Mounting hardwareKraken Compatibility Chart
This Kraken configuration is compatible with the racks listed below:
Power Rack
Height Required
Crossmember Depth Required
84", 90", or 108" (Requires raising the height of your crossmembers)
24", 30" or 43"
92.25", or 110.25" (Requires one extra pair of crossmembers above the Flat Feet & the 110.25" requires raising the height of your crossmembers)
24", 30" or 43"
84", 90", or 108" (Requires raising the height of your crossmembers)
24", 30" or 43"
93.25", or 111.25" (Requires one extra pair of crossmembers above the Flat Feet & the 11.25" requires raising the height of your crossmembers)
24", 30" or 43"
Non-BoS Rack Compatibility: You don’t need one of our power racks to unleash The Kraken! This rack attachment’s mounting brackets make it an awesome addition to most 3” x 3” power racks. Plus, we’ve got affordable rack components to bridge any gaps. See? No Bells of Steel blood oath required.
IMPORTANT: Rack must be bolted down or have Front Foot Stabilizers. Minimize single-sided cable use as it accelerates wear on the cable & pulleys and may cause cable twisting.
$699.99X OUT OF STOCK -
Backordered - Ships 2025/04/15
Kraken Weight Stack - Single Side
Kraken Rack Attachment for 4 Post Hydra & Manticore Racks (Single Side)
The Kraken is a compact rack-mounted cable system, turning your 3” x 3” 4-post power rack with ⅝” or 1” holes into a dual-handle cable tower with 5lbs to 210+lbs of resistance! All of this while maintaining the use of your barbell and rack attachments.
It comes in two versions:
- Plate-Loaded: use your weight plates to save big bucks
- Weight Stack: a convenient 210-pound stack for quick, no-fuss adjustmentsThanks to the knurled handle, nylon rollers and chrome-coated pop pins, the trolleys are adjustable with a single hand. By using your uprights’ holes for height selections, you can fine-tune the feel of nearly all your cable exercises.
The Kraken saves the clangin’ & bangin’ for your barbell lifts; its aluminum pulleys and dual guide rods deliver the kind of velvety smoothness you'd expect at a commercial gym — but without the crowds, the dude grunting in the corner, and that fit-fluencer hogging the Smith Machine for “just one more angle.”
The dual aluminum handles have 6002 bearings, rotating as smoothly as a barbell, and allow bilateral exercises from a single upright. A single cable features a 2:1 pull ratio (10lbs feels like 5lbs), tackling everything from rehab work to isolations. Plus, the cable travel offers uninterrupted focus during sport-specific drills or while getting that joooooicy bicep pump.
When connected with the cable adapter, the Kraken converts into a glorious 1:1 pull ratio — perfect for heavy lat pulldowns & low rows — with no need to buy a separate weight pack expansion down the road.
Safety is no afterthought either — the Weight Stack version features an optional Shroud that does double duty: protecting fingers (big and small) AND acting as a pegboard, keeping your cable attachments neatly stowed using their included hooks. This means more family time while keeping your little ones safe… because a home gym shouldn't need a “Caution: Dangerous Sh*t EVERYWHERE” sign.
A Single Side of the Kraken Includes:
- Two aluminum handles
- One cable adapter
- Aluminum pulley wheels
- Cables
- Trolley
- Guide rods
- Weight carriage or weight stacks
- Mounting brackets
- Mounting hardwareKraken Compatibility Chart
This Kraken configuration is compatible with the racks listed below:
Power Rack
Height Required
Crossmember Depth Required
84", 90", or 108" (Requires raising the height of your crossmembers)
24", 30" or 43"
92.25", or 110.25" (Requires one extra pair of crossmembers above the Flat Feet & the 110.25" requires raising the height of your crossmembers)
24", 30" or 43"
84", 90", or 108" (Requires raising the height of your crossmembers)
24", 30" or 43"
93.25", or 111.25" (Requires one extra pair of crossmembers above the Flat Feet & the 11.25" requires raising the height of your crossmembers)
24", 30" or 43"
Non-BoS Rack Compatibility: You don’t need one of our power racks to unleash The Kraken! This rack attachment’s mounting brackets make it an awesome addition to most 3” x 3” power racks. Plus, we’ve got affordable rack components to bridge any gaps. See? No Bells of Steel blood oath required.
IMPORTANT: Rack must be bolted down or have Front Foot Stabilizers. Minimize single-sided cable use as it accelerates wear on the cable & pulleys and may cause cable twisting.
$1,399.99X OUT OF STOCK
-
Band Pegs with Carabiners
Band Pegs with Carabiners
Band Pegs are designed to help strengthen those sticking points and blast through plateaus. Use bands to add resistance to squats, rack pulls, benching, and more. The carabiners offer extra security if you have nightmares about bands coming unhooked and slapping you silly. Select the band pegs that match your power rack specs. Sold in pairs.$19.99+ ADD -
Standard Band Pegs
Standard Band Pegs
Band Pegs are classic band pegs to help strengthen those sticking points and blast through plateaus.
Use bands to add resistance to squats, rack pulls, benching, and more. Select the band pegs that match your power rack specs. Sold in pairs.
$34.99+ ADD -
Adjustable Straight Pull-up Bar
Adjustable Pull-up Bar Rack Attachment
The world is your oyster with this handy-dandy rack attachment. Use it as a second pull-up bar on your power rack or add it to a pair of lever arms to unlock barbell and machine-inspired exercises at home — hip thrusts, thrusters, rows, deadlifts, you name it! The beefy 6-gauge steel promises solid construction while the different finishes & knurling offer plenty of variety. With a max capacity of 500lbs, these adjustable pull-up bars are meant to withstand heavy weights. Choose the option that suits your power rack or cable tower. Hardware included.
2.3"x2.3" bare steel: Fits our 2.3" racks & Cable Towers, 1.25" diameter, bare steel finish & includes hitch pins
2.3"x2.3" knurled stainless: Fits our 2.3" racks & Cable Towers, 1" diameter, stainless steel finish, moderate knurling & includes hitch pins
Hydra powder coated: Fits our Hydra racks, 1.25" diameter, light textured black powder coat finish & includes hitch pins
Manticore powder coated: Fits our Manticore racks, 1.25" diameter, light textured black powder coat finish, includes quick-locking mag pins & UHMW lining inside to protect your rack
IMPORTANT: Both 2.3" pull-up bars are NOT compatible with our Strongman Yoke, as its uprights are slightly too wide to accommodate them.
$59.99+ ADD -
Landmine Attachment
Landmine Rack Attachment
Add versatility to your strength training routine with the Landmine attachment! Choose the version that corresponds with your power rack tubing & hole size.
The Standard version fits any rack with 5/8" holes (including our 60mm & Hydra racks) provided the tubing length or width is no greater than 3". It boasts a beefy 315lb capacity with a UHMW-lined sleeve to protect your favorite Olympic barbell as you squat, press, row, Viking Press, and twist to target different muscle groups for an explosive workout.
The Manticore version fits our Manticore racks & non-Bells of Steel racks with 1″ holes and width or length no greater than 3″. Boasting a beefy 315lb capacity, it rotates in two axes instead of one for smoother landmine workouts and locks into your rack more securely using a mag pin with UHMW protection for your rack. The inner UHMW sleeve protects your barbell and the locking pin keeps it secure so your heavy training session doesn't blow up in your face.
Download Racks with 5/8" Holes - Hydra (3" x 3") and 2.3" x 2.3" Racks Product Manual
Download Manticore (3" x 3"; 1" Holes) Product Manual$69.99+ ADD -
Y Dip Attachment
Y Dip Bar Rack Attachment
The heavy-duty Y Dip Attachment easily mounts to your rack for dips, knee or leg lifts, and more. Perfect for blasting your chest, delts, triceps, and core! You can even get creative and use this for neutral grip pull ups and inverted rows when you're short on space or time.
This rack attachment boasts a black powder coat to prevent rust and UHMW lining to protect your uprights and ensure a snug fit. The UHMW-lined Manticore version can be hung vertically on your upright for storage.
Easily install and adjust the height with a simple drop pin. With a 500lb weight capacity, you can throw on a Dip Belt and some Weight Plates for some extra flair.
Choose the Y Dip Attachment that matches your power rack specs.
IMPORTANT: If your rack is not bolted to the ground or otherwise secured, you must use the Y Dip Attachment on the inside of your rack.
Download Y Dip Bar Rack Attachment - 2.3" x 2.3" Product Manual
Download Y Dip Bar Rack Attachment - Hydra Product Manual$139.99+ ADD -
Seal Row Pad
Seal Row Pad Rack Attachment
Minimize fatigue, so you can finally push your back muscles to their limit! Maintain your form with chest support, minus the bulky bench. This streamlined rack attachment installs and adjusts quickly and easily, unlocking more than just seal rows-use it for flies, hip thrusts, incline curls, or a comfy chair between sets.
Say goodbye to notoriously rickety and time-consuming set ups (here's looking at you, seal rows and hip thrusts) and hello to a 30 second setup and exceptional muscle targeting.
With 7 adjustable positions, plenty of head room, 2.25" thick pad, and a beefy 500lb capacity, you'll wonder how you ever lived without it.
Select the seal row pad that corresponds with the uprights and hole size of your power rack.
Download Seal Row Pad Rack Attachment - Manticore Product Manual
Download Seal Row Pad Rack Attachment - 2.3" x 2.3" Product Manual
Download Seal Row Pad Rack Attachment - Hydra Product Manual$219.99+ ADD -
Spotter Arms
Spotter Arms Rack Attachment
You may be more than a pretty face, but dropping a loaded barbell while benching certainly won’t improve things.Stay safe while benching or squatting with the heavy-duty Spotter Arms Attachment! Or use them as a secondary squat/bench station for barbell supersets! UHMW lining protects your barbell from damage, while the Manticore version boasts extra UHMW to keep your rack uprights in tip-top shape.60mm version: compatible with our 60mm racks and non-B.o.S. 2.3" x 2.3" racks with 5/8" holes.Hydra version: compatible with our Hydra racks and non-B.o.S. racks with true 3" x 3" uprights with 5/8" holes.
Manticore version: compatible with our Manticore racks and non-B.o.S. racks with true 3" x 3" uprights with 1" holes.
Download Spotter Arms Rack Attachment - 2.3" x 2.3" (5/8" Holes) Pair Product Manual$189.99+ ADD -
Globe Pull-up Bar
Globe Pull Up Bar
Raise the bar on your strength training with the last pull-up bar you'll ever need.
Choose from a standard grip, neutral grip, or globe grip to keep things spicy.
Target your back, biceps, forearms, and core, or just hang around to boost your grip strength and decompress your spine after heavy squats.
The Globe Grip Pull Up Bar has an innovative design and rust-resistant black powder coat. With a 500lb weight capacity and sturdy steel construction, this bad boy was built to last.
Choose the size that corresponds with your power rack.
Requires a 43" crossmember or can be mounted on the side of your rack if it has a 43" depth. Hardware included.
$189.99+ ADD -
Plate Loaded Cable Tower
Cable Tower
Can't picture yourself doing ONLY barbell exercises for the rest of your life? With just one Cable Tower, you can weave hundreds of cable machine exercises into your fitness routine and easily switch from one to another.
Ideal for fitness enthusiasts looking to boost their strength and build muscle, the home gym Cable Tower offers unmatched versatility for a compact gym setup at home. This machine allows you to incorporate a wide variety of cable exercises, targeting different muscle groups for a balanced workout. Whether you’re performing tricep extensions, rows, or curls, the cable workout tower’s adaptability and smooth functionality makes it an essential addition to any workout space. Ready to expand your routine? Learn how to use a home gym Cable Tower machine and discover key exercises.
Dual Nylon Adjustable Handles (included) on the upright with 33 height settings create... 33, carry the 1...endless possibilities! Throw on some of our best-selling Cable Tower attachments (we recommend the Y Dip, Seal Row Pad, and Landmine) for even more versatility.
For the best rack attachment versatility, select the version that includes the rear upright—this increases its stability and offers additional storage for small items on Utility Hooks.
Olympic Weight Plate loadable sleeves keep the costs low and the possibilities high, while the 210-pound Weight Stack version is the crème de la crème of convenience.
Also included is the 2-1 Cable Adapter, connecting both cables & upgrading the pull ratio from 2:1 to an incredible 1:1 ratio.
Need a rack & cable combo machine? Check out the All-In-One Trainer or Cable Tower Squat Stands.
IMPORTANT: Due to their small footprint and tall height, Cable Towers MUST be bolted down to ensure the user and equipment’s safety. Mounting hardware is not included — we recommend Tapcon+ screws. Ships unassembled.
$399.99+ ADD -
Backordered - Ships 2025/01/31
Weight Stack Cable Tower
Cable Tower
Can't picture yourself doing ONLY barbell exercises for the rest of your life? With just one Cable Tower, you can weave hundreds of cable machine exercises into your fitness routine and easily switch from one to another.
Ideal for fitness enthusiasts looking to boost their strength and build muscle, the home gym Cable Tower offers unmatched versatility for a compact gym setup at home. This machine allows you to incorporate a wide variety of cable exercises, targeting different muscle groups for a balanced workout. Whether you’re performing tricep extensions, rows, or curls, the cable workout tower’s adaptability and smooth functionality makes it an essential addition to any workout space. Ready to expand your routine? Learn how to use a home gym Cable Tower machine and discover key exercises.
Dual Nylon Adjustable Handles (included) on the upright with 33 height settings create... 33, carry the 1...endless possibilities! Throw on some of our best-selling Cable Tower attachments (we recommend the Y Dip, Seal Row Pad, and Landmine) for even more versatility.
For the best rack attachment versatility, select the version that includes the rear upright—this increases its stability and offers additional storage for small items on Utility Hooks.
Olympic Weight Plate loadable sleeves keep the costs low and the possibilities high, while the 210-pound Weight Stack version is the crème de la crème of convenience.
Also included is the 2-1 Cable Adapter, connecting both cables & upgrading the pull ratio from 2:1 to an incredible 1:1 ratio.
Need a rack & cable combo machine? Check out the All-In-One Trainer or Cable Tower Squat Stands.
IMPORTANT: Due to their small footprint and tall height, Cable Towers MUST be bolted down to ensure the user and equipment’s safety. Mounting hardware is not included — we recommend Tapcon+ screws. Ships unassembled.
$1,279.98+ ADD -
Nordic Curl Package
Hydra Nordic Curl Package
The Hydra Nordic Curl Package is an easy-to-set-up & comfortable solution for Nordic hamstring curls.
Includes:
- 1x Pair of Deadlift Pads
- 1x Hydra Split Squat Attachment that fits on our Hydra Racks or non B.o.S. racks with true 3" x 3" tubing with 5/8" holes only.
$319.98X OUT OF STOCK -
Lever Arm Belt Squat
Belt Squat / Lever Arms Rack Attachment
A compact, money-saving, multi-functional Belt Squat / Lever Arms Rack Attachment, ideal for home gym owners who have a tight space (and wallet). Get the same versatility as our beastly Belt Squat Machine at a fraction of the cost and footprint. All components can also be used as standalone pieces of equipment: 2 Lever Arms, 2 Closed Lever Arm Handles, 2 Plate Pegs and a Dip Belt. The belt shifts the load to the hips during squats, putting zero load on your spine and eliminating upper body engagement so you can train around mobility issues and injuries. Attach this to your power rack for rows, high pulls, presses, Romanian deadlifts, and more.
Choose the Belt Squat / Lever Arms Rack Attachment that corresponds with your power rack measurements.
$304.97+ ADD -
Leg Curl/Leg Extension
Leg Curl / Leg Extension Rack Attachment
Economically isolate your quads & hammies to build a nice set of wheels.
The Leg Extension/Curl Rack Attachment offers a machine-like feel and stability without taking up valuable real estate in your home gym. This beefy attachment has a weight plate capacity of 250lbs and a user capacity of 250lbs.
The Leg Extension/Curl unlocks seated leg extensions, so you can blast your quads but don't forget your hammies! They can be isolated one at a time with standing single-leg hamstring curls for some juicy hams worthy of Sunday dinner. Throw on some resistance bands for tension you can cut with a knife (which we do not recommend).
Choose the Leg Extension/Curl Power Rack Attachment that coordinates with your power rack uprights and hole size.
IMPORTANT: Your power rack MUST be bolted down when using the Leg Extension/Curl to ensure user and equipment safety. For maximal stability, use this attachment on the inside of your rack.
Download Manticore (3" x 3"; 1" Holes) Product Manual
Download Hydra (3" x 3"; 5/8" Holes) Product Manual
Download 2.3" x 2.3" (5/8" Holes) Product Manual$399.99+ ADD -
Lever Arms + Open Handles
Lever Arms Rack Attachment
Hydra Lever Arms simulate DOZENS of machine exercises in only a fraction of the space & without a jaw-dropping price tag. Add an Adjustable Pull-Up Bar for even more versatility (hip thrusts and leg presses, anyone?)
Height and handle adjustments are simple, so you can find your perfect placement.
These space-efficient attachments (sold in pairs) add only 4.5" to the front of your rack when not in use and tuck nicely inside racks with a minimum 43" depth.
With a 500lb weight capacity and two handle styles to choose from, you're set for life.
Throw on your Olympic weight plates and a set of magnetic collars, and get lifting. Your gainz depend on it.
IMPORTANT: The Hydra Lever Arms are only guaranteed to fit on true 3" x 3" uprights with 5/8" holes. If installed on the exterior of your uprights, your rack MUST be bolted down to avoid tipping and/or injury.
Download Lever Arm Open Handles Only (No Arms) - Manticore (Pair) Product Manual
Download Lever Arm Closed Handles Only (No Arms) - Manticore (Pair) Product Manual
Download Lever Arms Rack Attachment Arms Only (No Handles) - Manticore (Pair) Product Manual
Download Lever Arm Open Handles Only (No Arms) - Hydra (Pair) Product Manual
Download Lever Arm Closed Handles Only (No Arms) - Hydra (Pair) Product Manual
Download Lever Arms Rack Attachment Arms Only (No Handles) - Hydra (Pair) Product Manual$249.97+ ADD -
Lever Arms + Closed Handles
Lever Arms Rack Attachment
Hydra Lever Arms simulate DOZENS of machine exercises in only a fraction of the space & without a jaw-dropping price tag. Add an Adjustable Pull-Up Bar for even more versatility (hip thrusts and leg presses, anyone?)
Height and handle adjustments are simple, so you can find your perfect placement.
These space-efficient attachments (sold in pairs) add only 4.5" to the front of your rack when not in use and tuck nicely inside racks with a minimum 43" depth.
With a 500lb weight capacity and two handle styles to choose from, you're set for life.
Throw on your Olympic weight plates and a set of magnetic collars, and get lifting. Your gainz depend on it.
IMPORTANT: The Hydra Lever Arms are only guaranteed to fit on true 3" x 3" uprights with 5/8" holes. If installed on the exterior of your uprights, your rack MUST be bolted down to avoid tipping and/or injury.
Download Lever Arm Open Handles Only (No Arms) - Manticore (Pair) Product Manual
Download Lever Arm Closed Handles Only (No Arms) - Manticore (Pair) Product Manual
Download Lever Arms Rack Attachment Arms Only (No Handles) - Manticore (Pair) Product Manual
Download Lever Arm Open Handles Only (No Arms) - Hydra (Pair) Product Manual
Download Lever Arm Closed Handles Only (No Arms) - Hydra (Pair) Product Manual
Download Lever Arms Rack Attachment Arms Only (No Handles) - Hydra (Pair) Product Manual$299.98+ ADD
Storage
-
12" Utility Horn
Utility Horn Rack Attachment
The Utility Horn easily mounts on your rack for quick access to your Olympic weight plates, bands, or chains-whatever you need handy up to 100lbs. It keeps your stuff off the floor to give you more room to smash your goals.
The cotter pin offers extra security and stability while making it easy to move around until you find the perfect spot, and allows you to fit more onto your rack, taking up only one hole on the upright (compared to bolt-on plate pegs, for example, that use multiple holes to mount). The black powder coating offers rust resistance.
As a bonus, you can use it for a step-up to reach the pull-up bar on a rack that's a bit too tall for you, or to help you do one more set of negative pull-ups.
Choose the utility horn that corresponds with your rack configurations and hole size.
$24.99+ ADD -
Vertical Barbell Holder
Vertical Mount Barbell Holder Rack Attachment
Ready to set a PR in home gym organization? Save space and get even more use out of your power rack by attaching a Vertical Mount Barbell Holder on the front or back of your uprights.
Two bolts offer easy mounting, while an inner liner protects your barbell.
The black powder coat offers rust resistance, and the 220lb max capacity can handle your barbell, even if you use it as a makeshift coat rack (please don't).
Choose the Vertical Mount Barbell Holder that corresponds with your power rack measurements. Hardware included.
IMPORTANT: If your ceiling is less than 9 feet high, you may find using the Barbell Holder challenging with a standard barbell - please keep this in mind prior to purchasing.
Download Vertical Mount Barbell Holder Rack Attachment - Hydra Product Manual
Download Vertical Mount Barbell Holder Rack Attachment - Manticore Product Manual$44.99+ ADD -
5" Bolt-on Plate Pegs
Bolt-On Plate Pegs
Keep your weight plates organized and easy to access with rack-mountable plate pegs.
Get locked and loaded with bolt-on plate pegs (don't worry, these are easy to install and remove as needed). Options range from 5" to 13" loadable sleeves designed to fit Olympic-sized weight plates.
Black powder coat protects your plates while reducing friction for easy loading and unloading. Choose the plate pegs that fit your power rack.
On average, each 13" Manticore peg can fit eight 45lb Mighty Grip Plates or four 45lb Crumb Bumpers. On average, each 5" Manticore peg can fit the following Mighty Grip Plates: three 25lb plates, five 10lb plates, or five 5lb plates.
IMPORTANT: Sold in pairs. Hardware included.
Download Bolt-On Plate Pegs - Hydra 5" (Pair) Product Manual
Download Bolt-On Plate Pegs - Hydra 13" (Pair) Product ManualDownload Bolt-On Plate Pegs - Manticore 5" (Pair) Product Manual
Download Bolt-On Plate Pegs - Manticore 13" (Pair) Product Manual$49.99+ ADD -
13" Bolt-on Plate Pegs
Bolt-On Plate Pegs
Keep your weight plates organized and easy to access with rack-mountable plate pegs.
Get locked and loaded with bolt-on plate pegs (don't worry, these are easy to install and remove as needed). Options range from 5" to 13" loadable sleeves designed to fit Olympic-sized weight plates.
Black powder coat protects your plates while reducing friction for easy loading and unloading. Choose the plate pegs that fit your power rack.
On average, each 13" Manticore peg can fit eight 45lb Mighty Grip Plates or four 45lb Crumb Bumpers. On average, each 5" Manticore peg can fit the following Mighty Grip Plates: three 25lb plates, five 10lb plates, or five 5lb plates.
IMPORTANT: Sold in pairs. Hardware included.
Download Bolt-On Plate Pegs - Hydra 5" (Pair) Product Manual
Download Bolt-On Plate Pegs - Hydra 13" (Pair) Product ManualDownload Bolt-On Plate Pegs - Manticore 5" (Pair) Product Manual
Download Bolt-On Plate Pegs - Manticore 13" (Pair) Product Manual$59.99+ ADD -
Change Plate Pegs
Change Plate Storage Pegs
Keep your change plates conveniently stored and accessible to bust through your next plateau.
With 8" loadable sleeves, Change Plate Pegs bolt onto your rack uprights for easy access to your Olympic change plates.
Triple pegs for additional storage to keep your fractional plates organized and ready for your next 1lb PR. Trust us-it counts! You can throw resistance bands and other accessories on there, too, if you want; we aren't checking.
Easy installation with two bolts; hardware is included. Select the Change Plate Pegs that correspond with your power rack.
The Manticore version comes with UHMW protection for your uprights, and rubber stoppers to prevent your plates from hitting the mounting bolt heads.
$59.99+ ADD -
Pin Plate Pegs
Pin Plate Pegs
Keep your weight plates organized and easy to access with rack-mountable plate pegs.
These convenient drop-in pegs are adjustable in seconds with sleeves to fit Olympic-sized weight plates.
Black powder coat protects your plates while reducing friction for easy loading and unloading.
Choose the plate pegs that fit your power rack. Sold in pairs.
- 2.3" version: 9" loadable length
- Hydra version: 12.5" loadable length
- Manticore version: 12.5" length
$59.99+ ADD -
Hydra Plate Peg Set
Bolt-On Plate Peg Sets
Get 5 pairs of bolt-on plate pegs (3 pairs of 13" pegs & 2 pairs of 5" pegs) to turn your power rack into a weight plate storage mecca.
Black powder coat protects your Olympic-sized weight plates while making them easy to load and unload. We've conveniently bundled them together to save you valuable time clicking (then wasted it by making you read this sentence).
Choose the plate peg set that fits your power rack measurements. Easy installation. Hardware included.
$219.99+ ADD -
Hanging Accessory Holder
Accessory Holder (Wall or Hydra Mounted)
Set a PR in home gym tidiness with the Hydra rack-mountable Hanging Accessory Holder. Steel construction and five prongs keep your bands, chains, and accessories out of the way but within reach. Mount this compact storage solution to your wall or Hydra rack. Bid a not-so-fond farewell to impossibly tangled bands and chaotically misplaced clips. You'll never look like one of those poor, helpless saps who can't do anything right in an infomercial again. Hardware included.
IMPORTANT: Fits racks with true 3" x 3" tubing & 5/8" holes.
$49.99+ ADD -
1 Barbell Holder
Hanging Barbell Holders
Ready to display your barbells like the masterpieces they are? Welcome to the Metabolic Museum of Art. The Strengthsonian. The… you know what? You create one. We’re sick of doing all the heavy lifting around here.Curate your own lifting gallery with a 1, 2, or 5 barbell holder, or mix and match to suit your storage needs.
Mount directly to your concrete wall or your Hydra or non-B.o.S. rack with true 3″ x 3″ tubing & 5/8″ holes to keep your barbells secure, out of the way, and readily accessible for your next lifting masterpiece.
IMPORTANT: Fits racks with true 3″ x 3″ tubing & 5/8″ holes. Hardware included.$29.99+ ADD -
2 Barbell Holder
Hanging Barbell Holders
Ready to display your barbells like the masterpieces they are? Welcome to the Metabolic Museum of Art. The Strengthsonian. The… you know what? You create one. We’re sick of doing all the heavy lifting around here.Curate your own lifting gallery with a 1, 2, or 5 barbell holder, or mix and match to suit your storage needs.
Mount directly to your concrete wall or your Hydra or non-B.o.S. rack with true 3″ x 3″ tubing & 5/8″ holes to keep your barbells secure, out of the way, and readily accessible for your next lifting masterpiece.
IMPORTANT: Fits racks with true 3″ x 3″ tubing & 5/8″ holes. Hardware included.$39.99+ ADD -
5 Barbell Holder
Hanging Barbell Holders
Ready to display your barbells like the masterpieces they are? Welcome to the Metabolic Museum of Art. The Strengthsonian. The… you know what? You create one. We’re sick of doing all the heavy lifting around here.Curate your own lifting gallery with a 1, 2, or 5 barbell holder, or mix and match to suit your storage needs.
Mount directly to your concrete wall or your Hydra or non-B.o.S. rack with true 3″ x 3″ tubing & 5/8″ holes to keep your barbells secure, out of the way, and readily accessible for your next lifting masterpiece.
IMPORTANT: Fits racks with true 3″ x 3″ tubing & 5/8″ holes. Hardware included.$49.99X OUT OF STOCK -
Utility Hook
Utility Hook
The Utility Hook is the smallest—but mightiest—gym storage solution.This solid steel s-hook easily slides into tubing holes up to 11 gauge (2.9mm thick).Organize your cable attachments along the centre upright of your All-in-One Trainer. Hang lifting chains off the sides of the rear upright on your Cable Tower. Store your barbell across two hooks on a 76" wide Hydra Universal Storage System.And this is just the beginning. Beyond your gym's space restrictions, the only limit is your creativity. Don't be surprised if you get hooked.IMPORTANT: Fits all round holes on tubing up to 11-gauge (2.9mm) thick and is cross compatible with other brands as long as the gauges isn't lower than 11.$7.99X OUT OF STOCK -
Utility Hook 2x
Utility Hook
The Utility Hook is the smallest—but mightiest—gym storage solution.This solid steel s-hook easily slides into tubing holes up to 11 gauge (2.9mm thick).Organize your cable attachments along the centre upright of your All-in-One Trainer. Hang lifting chains off the sides of the rear upright on your Cable Tower. Store your barbell across two hooks on a 76" wide Hydra Universal Storage System.And this is just the beginning. Beyond your gym's space restrictions, the only limit is your creativity. Don't be surprised if you get hooked.IMPORTANT: Fits all round holes on tubing up to 11-gauge (2.9mm) thick and is cross compatible with other brands as long as the gauges isn't lower than 11.$14.99X OUT OF STOCK -
Utility Hook 3x
Utility Hook
The Utility Hook is the smallest—but mightiest—gym storage solution.This solid steel s-hook easily slides into tubing holes up to 11 gauge (2.9mm thick).Organize your cable attachments along the centre upright of your All-in-One Trainer. Hang lifting chains off the sides of the rear upright on your Cable Tower. Store your barbell across two hooks on a 76" wide Hydra Universal Storage System.And this is just the beginning. Beyond your gym's space restrictions, the only limit is your creativity. Don't be surprised if you get hooked.IMPORTANT: Fits all round holes on tubing up to 11-gauge (2.9mm) thick and is cross compatible with other brands as long as the gauges isn't lower than 11.$19.99X OUT OF STOCK -
Utility Hook 10x
Utility Hook
The Utility Hook is the smallest—but mightiest—gym storage solution.This solid steel s-hook easily slides into tubing holes up to 11 gauge (2.9mm thick).Organize your cable attachments along the centre upright of your All-in-One Trainer. Hang lifting chains off the sides of the rear upright on your Cable Tower. Store your barbell across two hooks on a 76" wide Hydra Universal Storage System.And this is just the beginning. Beyond your gym's space restrictions, the only limit is your creativity. Don't be surprised if you get hooked.IMPORTANT: Fits all round holes on tubing up to 11-gauge (2.9mm) thick and is cross compatible with other brands as long as the gauges isn't lower than 11.$49.99X OUT OF STOCK -
Storage Basket
Rack Attached Storage Basket
Tame gym clutter with the Rack Attached Storage Basket!This isn’t your grandma’s picnic basket. It’s crafted from 14-gauge steel and built to withstand the rigors of any serious gym environment.Thanks to the rugged design, all your fitness accessories are safe inside its fortress walls. Use a couple of Utility Hooks to hang your lever belt & lifting chains from the outside of the basket for even more #spacegainzMount it on your power rack, storage system, or wall studs.IMPORTANT: Comes standard with rack-mounting hardware for tubing with ⅝” holes. Wall mounting hardware not included.$74.99X OUT OF STOCK
Rack
Rack Attachments
Storage Attachments
A stable, modular & customizable rack with no floor bolting needed.
Hydra Flat Foot Power Rack Builder (3" x 3", ⅝" Holes)
Product Features
-
![]()
NO FLOOR BOLTING
With the flat foot support system, you won't have to bolt your rack into your floor (or hire a contractor). The larger contact surface area makes the rack sturdier for racking/unracking your bar, during pull-ups, and when doing dips.
-
![]()
CLASSIC 4-POST RACK
This 4 post power rack is the granddaddy of all rack configurations. Laser-cut numbers to easily line up rack attachments. Beastly 1,000-pound capacity and ultra-stable 11-gauge tubing. Everything you need to tame (or unleash) the mythical beast within.
-
![]()
NEVER UPGRADE AGAIN
You know what they say: buy once, cry once. The Hydra is highly customizable with its modular components, so it can adapt with you through every phase of your life. It's the last rack you'll ever need — which takes the sting out of the investment.
Product Details
The Flat Foot Power Rack is where classic design and rock-solid stability team up with a chalky fist bump of swoleship.
Its 1,000-pound capacity outlasts heavy squats, handles big bench presses and withstands chin-ups with 8 kids hanging onto your waist. The uprights measure true 3" x 3" which is EXACTLY 76.2mm x 76.2mm, instead of the typical 75mm x 75mm uprights of other brands' imported racks.
By matching the same tubing specs as many of our American competitors, you can mix and match attachments freely without needing to stick to one brand - hello, open ecosystem! Built with modular components, so you can expand later with Hydra components or divide it into two smaller Hydra racks to accommodate a new home gym space or team workouts with your swolemate. Compatible with all Hydra rack attachments, like the hyper-versatile Hydra Lat Pulldown.
Awarded Garage Gym Reviews' Best Squat Rack with Pull-Up Bar in 2024!
IMPORTANT: The Hydra series of power racks are TRUE 3" x 3" tubing with 5/8" holes, so only Hydra attachments & non-B.o.S. attachments made precisely for 76.2mm x 76.2mm uprights with 5/8" holes will fit.
PRODUCT SPECS
| General | |
|---|---|
Total Length (Depth) |
|
Total Width |
|
Total Height |
|
Rack Pin |
|
|
|
|
| Construction | |
Upright Specs |
|
Hole Size |
|
Hole Spacing |
|
Steel Thickness |
|
Coating |
|
Weight Capacity |
|
- LLucasVerified BuyerRated 4 out of 5 stars10 months agoNice Rack - Some Quality Control Issues Though
I sold my Rogue RML-490 to replace with the Hydra. Mostly because I wanted a rack with shorter uprights and smaller crossbeams to save space and I really loved the light blue glossy finish. There were some issues with the powder coat not fully covering the crossmembers (see pics) and one of the uprights had a number that wasn't completely cut out, which is fine, honestly. What I dislike the most about this rack however is just how easily the paint coat scratches off. I purchased a pair of the spotter arms safeties with these and they fit extremely snug on the uprights. Unfortunately, they also have sharp edges and hardened weld/paint blobs that scratch up the paint finish of the rack significantly from regular use. I imagine this quality issue with the glossy paint is why they are switching over to a textured matte finish for the colours. I do like the rack though and for the price you really can't go wrong. I'll just have to accept that the gloss finish is going to get extremely scratched up over time. It would be nice if BoS would start putting UHMW lining on their rack attachments to help prevent this though.
Bells of Steel CanadaHI Lucas, Thank you so much for your review of our Hydra flat foot rack. We are glad you have been overall pleased with your rack but do apologize for the issues you noted with the finish and scratching that have occurred. We are switching to a textured matte to hopefully solve this and will also look at adding more UHMW to our accessories. We hope you still love your new rack and if you ever have any concerns please dont hesitate to reach out to us at support@bellsofsteel.com Yours in strength, The BoS team - STSheldon T.Rated 5 out of 5 stars1 year agoHydra Rack, cable tower and accessories.
I picked up a new Hydra flat foot rack, plate loading cable tower, multiple accessories and some additional weights. Easy to assemble and looks to be very well built and HD enough to meet my needs. I needed to upgrade my old equipment to something that could handle the higher weight levels in my training. This equipment looks to be ready for the test, time will tell. I already had some BOS gear but I'm sure I will be adding more of the BOS equipment to my home gym in the future.
Bells of Steel CanadaHi Sheldon, Thank you so much for the Stellar review of our equipment . We are beyond pleased to hear you have enjoyed your new rack, and cable system and we know it will be just what you need to take your training to the next level. We cant wait to serve you again soon, and wish you the very best! Sincerely, Marcus & the BoS Team - TMTeri-Lynn M.Verified BuyerRated 5 out of 5 stars2 years agoAwesome Rack!
We love our hydra rack in our gym. It looks sleek, is very solid, and very multipurpose. It has enough space so you can use the outside and inside at the same time. It's also great that the holes for adjusting the bar height are close together, and even closer together in the bench zone for exact bar placement. We also loved how many options we had when choosing the safely straps, pull up bar, etc. The website was easy to use when ordering and shipping was fast and efficient. Great customer service too! Thanks Bells of Steel!
Bells of Steel CanadaHey Teri-Lynn, Thank you for the review, We are happy to hear you are loving your new Hydra 3 x 3 Inch Flat Foot Power Rack! Enjoy all the gainz you make! Yours in strength, William & the BoS crew - CChrisVerified BuyerRated 5 out of 5 stars8 months agoPost-Assembly Review
Overall, this is a fantastic and very high-quality build. Great value and is extremely customizable. For those looking for a commercial quality rack, I highly reccomend this one for the price (rouge quality with a much lower price). While there are a lot of great racks on the market, I'd say this stands out due to its versatility, including the many attachments available from BoS. I have a few already and will likely buy more. Would definitely purchase again.
Bells of Steel CanadaHi Chris, Thank you so much for your review of our Hydra 3x3 today and your kind words. We are so happy that you enjoyed your new rack so much and we hope it continues to suit your needs well for many years to come. Yours in strength, The BoS team - DDougVerified BuyerRated 4 out of 5 stars8 months agoHydra free standing power rack
I ordered the hydra free standing power rack to replace my Rogue SML-2C rack. I am a long time Rogue customer and thought of giving BOS a try after seeing a review on Garage Gym Reviews. The quality of the rack is outstanding. There were no burrs, assembly was straight forward, all holes aligned perfectly, powder coating was perfect and was surprised how stable the rack was without it bolted down. The accessories fit perfect (J-cups, safety straps etc) . Overall I'm very happy with the purchase. However, I gave it a four star review for the following reasons: First, ordering was confusing as BOS has both US and Canadian websites. If you order from the Canadian site (which I did first) it will not allow you to select the US as a shipping destination, you have to go to the US site to order. It would have been nice to have the website automatically redirect you. Second, after waiting for a few days I didn't get any info about the shipping of my order. I tried to call customer service by phone and kept getting stuck in an automated loop. I then sent an email inquiring about my order and they responded in the next day and my order went out shortly thereafter. Third, I received an extra 3x2 cross member that did not fit the power rack and I deduced it was in case I wanted to set it up like a squat stand. I also got a lot of extra hardware. I would have liked to exclude this and had a cheaper price. I guess it wasn't clear on the ordering because you have to order everything a la…
Bells of Steel CanadaHI Doug, Thank you so much for the honest and in depth review of our Hydra power rack. We are delighted to hear you have become a BoS customer after having loyalty's elsewhere and we sincerely hope we have met the mark. We certainly understand that in order to get 5 stars it would need to be a flawless experience and we apologize for some of the shortcomings you mentioned but thank you for pointing them out as it will certainly allow us to grow and improve. We cant wait to see you again. Yours in strength, Marcus & the BoS team
